2024-03-23, 01:01 PM
Hello,
I also have 2 sensors (anemometer and wind direction) model PR-3000-FXJT-N01.
On a windows system with the modbuspoll program, with a speed of 4800:
-wind direction, displays data (ex: 0.0, 1.45, 2.90, 3.135, 4.180 ....).
-anemometer gives some values depending on the rotation speed
I connected these sensors via usb with a "usb-rs485 adapter".
Has anyone been able to bring data from them to signal k?
Can the direction sensor also display an intermediate angle (not only from 45 to 45 degrees)?
I connected them to the pi5, also via usb, they can be seen in series (ttyusb0 and ttyusb1), but I don't know which plugin to use to read data from them and convert them and bring them to signal k.
Thank you for the help.
I also have 2 sensors (anemometer and wind direction) model PR-3000-FXJT-N01.
On a windows system with the modbuspoll program, with a speed of 4800:
-wind direction, displays data (ex: 0.0, 1.45, 2.90, 3.135, 4.180 ....).
-anemometer gives some values depending on the rotation speed
I connected these sensors via usb with a "usb-rs485 adapter".
Has anyone been able to bring data from them to signal k?
Can the direction sensor also display an intermediate angle (not only from 45 to 45 degrees)?
I connected them to the pi5, also via usb, they can be seen in series (ttyusb0 and ttyusb1), but I don't know which plugin to use to read data from them and convert them and bring them to signal k.
Thank you for the help.