2019-11-17, 11:18 AM
Please test and report. This message is especially aimed to advanced users of Node Red Dashboard and Influxdb/Chronograph/Kapacitor/Grafana.
Hi ! Nice update !
Some feedback….. as requested ;-)
Done a rough test with the new Dashboard app on a RPi 4, 2 Gb. RPi updated to latest OS Ievel and running the plaka.log file as input, it looks very good !
I’m a newbie with Grafana but configured the DB and did a setup just showing Depth and Speed Over Ground in a Graph. So OK !
In NodeRed I did a test with 2 of the supplied SK examples, ”adjust-depth” and ”high-wind-speed-alarm”, and another homemade application. Worked, so also OK !
Some thoughts…..
Think that the Install/Uninstall Icons should be placed at the same place in every application, se picture.
I had to copy the plaka.log file
sudo cp /usr/lib/node_modules/signalk-server/samples/plaka.log /usr/lib/node_modules/signalk-server/node_modules/@signalk/
so i could use it as Filestream input. Not the same compared to the original SignalK ?
Some load figures….
For the moment I’m running RPi with the setup mentioned above + AIS receiving with the RTL-AIS package and the CPU load is 38% and RAM use is 95%
So, all in all, thanks for Your awesome work !
PS
For Forum readers, extended install instructions is found here
https://pysselilivet.blogspot.com/2019/0...guide.html
DS
Hi ! Nice update !
Some feedback….. as requested ;-)
Done a rough test with the new Dashboard app on a RPi 4, 2 Gb. RPi updated to latest OS Ievel and running the plaka.log file as input, it looks very good !
I’m a newbie with Grafana but configured the DB and did a setup just showing Depth and Speed Over Ground in a Graph. So OK !
In NodeRed I did a test with 2 of the supplied SK examples, ”adjust-depth” and ”high-wind-speed-alarm”, and another homemade application. Worked, so also OK !
Some thoughts…..
Think that the Install/Uninstall Icons should be placed at the same place in every application, se picture.
I had to copy the plaka.log file
sudo cp /usr/lib/node_modules/signalk-server/samples/plaka.log /usr/lib/node_modules/signalk-server/node_modules/@signalk/
so i could use it as Filestream input. Not the same compared to the original SignalK ?
Some load figures….
For the moment I’m running RPi with the setup mentioned above + AIS receiving with the RTL-AIS package and the CPU load is 38% and RAM use is 95%
So, all in all, thanks for Your awesome work !
PS
For Forum readers, extended install instructions is found here
https://pysselilivet.blogspot.com/2019/0...guide.html
DS