(2019-11-21, 07:06 PM)rastam4n Wrote:(2019-11-21, 03:37 PM)Sailoog Wrote: type "uname -a" in a terminal to know your kernel and downloand and install the right driver from: https://www.rooco.eu/2018/06/13/firmware...ssier-hat/
Remember that RPI3 and RPI4 have different drivers and RPI4 drivers are for testing only right now. All drivers will be unified soon.
Okay thanks
I was hoping with a new driver install and a updated signal K install that I would get data to opencpn.... still nothing... is anyone able to get data from their moitessier hat to signal k and then to opencpn? I have all the connections as far as I know in signalK I have connections for UDP 51000 and 52000 and in opencpn I have tcp connections 10110 and 20220... but no data flow in the debug window and no data in the dashboard.
Hi, given that I am not a technician, I have Moitessier installed on the Pi4 and it gives me the same errors, I think you will have to wait for the update by Rocco and Sailoog. (In fact it is well explained: https://www.rooco.eu/2018/06/13/firmware...ssier-hat/).
(2019-11-21, 03:37 PM)Sailoog Wrote: type "uname -a" in a terminal to know your kernel and downloand and install the right driver from: https://www.rooco.eu/2018/06/13/firmware...ssier-hat/
Remember that RPI3 and RPI4 have different drivers and RPI4 drivers are for testing only right now. All drivers will be unified soon.
Hi Sailoog, with the Glowntiger server board (openplotter-MCS) and the Moitessier hat installed, I think there is a conflict with SPI ... I hope it settles everything when you develop "OpenPlotter MY APP" and in the meantime Rocco release the updated firmware ... and so? Look down:
"Moitessier HAT is attached.
I2C is enabled.
SPI is disabled. Please enable SPI interface in Preferences -> Raspberry Pi configuration -> Interfaces.
Moitessier HAT package is installed.
Package: moitessier
Status: install ok installed
Maintainer: Thomas POMS <hwsw.development@gmail.com>
Architecture: armhf
Version: 1.20190925-1-4.19.75-1.3.1
Description: Moitessier HAT (AIS/GNSS navigation)
This package provides all the relevant tools, binaries and scripts to communicate, control and update the Moitessier HAT.
Homepage: https://www.rooco.eu"