2019-11-23, 03:09 PM
(2019-11-23, 01:47 PM)glowntiger Wrote: Hi Max,
for what you use this line:
dtoverlay=i2c-gpio,i2c_gpio_sda=2,i2c_gpio_scl=3,bus=3
all other seems fine to me
@Sailoog:
The Moittesier Hat Can/SPI isn´t configurated in the config.txt . How do you do the configuration of the SPI?
Code:
dtoverlay=i2c-gpio,i2c_gpio_sda=2,i2c_gpio_scl=3,bus=3
this is added by Moitessier HAT driver to be able to update the firmware.
SPI is managed by the driver too. You have just to enable it in config.txt: dtparam=spi=on
Rooco guys will answer questions about the drivers better than me.