OpenPlotter 2 roadmap

[verkerkbr]

My Kindle has no problem with OpenPlotter AP (RPi4 Network 2.0.5 Beta).

Hi E-Sailing,

i'am using the latest 2.07-beta. I think I did not get an IP from the RPI4.

If I use my wireless lan network switch then I get an IP with the same Kindle setup.

The RPI is seen and has a strong signal. Renamed the AP to raspynet and password testraspi.
Then I get the error of not connecting and to try again.

Regards,

Bram

I updated the system to 2.07-beta.
When I changed the settings to yours I also got the error.
I found that "systemctl status openplotter-network" shows errors.
The solution is to uninstall openplotter-network and install it again. (This will create a new systemd file openplotter-network.service)

Hi E-sailing, after reinstalling the network 2.07 it partly works.
Connecting to my wifi network router and then the Ip adress of the RPI 192.168.1.106 it works.
Trying to conect to the RPI. Made a connection. IP 10.10.10.1 and it only show the frames but not the data.
What is the difference between these 2 settings ?

The Kindle is watertight, wireless, touchscreen and has a very clear black and white screen for the use in direct sunlight.

Bram

---

My Kindle has no problem with OpenPlotter AP (RPi4 Network 2.0.5 Beta).

Hi E-Sailing,

i'am using the latest 2.07-beta. I think I did not get an IP from the RPI4.

If I use my wireless lan network switch then I get an IP with the same Kindle setup.

The RPI is seen and has a strong signal. Renamed the AP to raspynet and password testraspi.
Then I get the error of not connecting and to try again.

Regards,

Bram

I updated the system to 2.07-beta.
When I changed the settings to yours I also got the error.
I found that "systemctl status openplotter-network" shows errors.
The solution is to uninstall openplotter-network and install it again. (This will create a new systemd file openplotter-network.service)

Hi E-sailing. Done that and it partly works.

Now I can use de data if I connect the Kindle via my wireless network router and to the network IP of the RPI.

Then tried to made the conection to the RPI direct. The connection worked.

Using the same address with then 10.10.10.1 instead
of 192.168.1.106 the Kindle only shows the frames but not the data.

I do not understand what is the difference between connecting via the wireless network router or direct.

Anyway the Kindle works but need some further adjustments.

Regards,

Bram