2019-12-05, 02:25 AM
Using Nov 28th copy of the Noob file installed on rPi4 with 4Gig.\ updated Dec2nd
I found the setup using usb keyboard and mouse / and HDMI High res screen went well (thanks it is very cool!!!!!!)
Within the openplotter settings I checked run headless (which had a note at bottom will require a reboot)Sp?
when rebooted using a gen 7 iPad (Vnc) all looked ok but when adjusting the settings through the "raspberry pi setup" (selected from application menu) I adjusted the screen resolution down to the Ipad settings.
Bug for me
Was on reboot after changing screen resolution it would not run headless? the setting seamed to be lost.
changing it with a monitor/keyboard attached again in the "openplotter settings" application, it again allowed headless (as long as I did not adjust screen resolution in the raspberry pi setup application) it works great.
The screen resolution adjustment also seem to present some issues with opencpn (screen layout which went back to single screen)?
second Item (system k? or ?) the app will not allow the units for Signal K from the rPi4 "Pi reporting CPU temp", to be in anything other than in Kelvin (this could be my error as I just started to play with openplotter/rPi and signal K) through the "standard instruments" page/app/gui?
In any case
Thanks to all who are working on this!
(hope the above helps)
Hope I posted this in the correct spot
I found the setup using usb keyboard and mouse / and HDMI High res screen went well (thanks it is very cool!!!!!!)
Within the openplotter settings I checked run headless (which had a note at bottom will require a reboot)Sp?
when rebooted using a gen 7 iPad (Vnc) all looked ok but when adjusting the settings through the "raspberry pi setup" (selected from application menu) I adjusted the screen resolution down to the Ipad settings.
Bug for me
Was on reboot after changing screen resolution it would not run headless? the setting seamed to be lost.
changing it with a monitor/keyboard attached again in the "openplotter settings" application, it again allowed headless (as long as I did not adjust screen resolution in the raspberry pi setup application) it works great.
The screen resolution adjustment also seem to present some issues with opencpn (screen layout which went back to single screen)?
second Item (system k? or ?) the app will not allow the units for Signal K from the rPi4 "Pi reporting CPU temp", to be in anything other than in Kelvin (this could be my error as I just started to play with openplotter/rPi and signal K) through the "standard instruments" page/app/gui?
In any case
Thanks to all who are working on this!
(hope the above helps)
Hope I posted this in the correct spot