This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
OMG under voltage
#5
(2019-09-23, 04:26 PM)rastam4n Wrote: Currently, I cut a usb cable and connected that to the power supply and plug into the micro usb port on the Rpi,

..............

Some USB cables are sold as "USB charging" cables. Some ordinary USB cables are fine for data but do not have thicker copper conductors to support the 2.5A or so that the Pi requires. I'd buy the biggest wire gauge USB cable and try that.

Best of luck!
Reply


Messages In This Thread
OMG under voltage - by rastam4n - 2019-09-23, 02:57 PM
RE: OMG under voltage - by baltika_no_9 - 2019-09-23, 03:25 PM
RE: OMG under voltage - by rastam4n - 2019-09-23, 04:26 PM
RE: OMG under voltage - by baltika_no_9 - 2019-09-23, 04:40 PM
RE: OMG under voltage - by Sailoog - 2019-09-23, 04:45 PM
RE: OMG under voltage - by Sailoog - 2019-09-23, 04:12 PM
RE: OMG under voltage - by pinguino - 2019-09-24, 10:53 AM
RE: OMG under voltage - by rastam4n - 2019-09-24, 03:46 PM
RE: OMG under voltage - by pinguino - 2019-09-24, 09:37 PM
RE: OMG under voltage - by b135802 - 2019-10-27, 06:49 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)