This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Unable to update from V1.0.0
#5
(2019-10-21, 02:52 PM)pol.bob Wrote:
(2019-10-18, 09:18 PM)Luckbert Wrote: Hello Sailing Infidel
It doesn't make much sense to put a lot of time into the update. There is only little investment in OP1. The time and power is needed in OP2.

Preparations and testing for OP 2 Beta are in full swing.

It makes much more sense to invest time in OP 2.
Many things work already.
Just give it a try and if you have any problems you are welcome to contact us.
Greetings Jürgen

Hi! Where's possible download and try OP 2?
Thank You
Paolo


I disagree with this as a blanket statement. 

OP2 is not yet ready for the general public unless all you need is a plotter with gps and a built in network switch. There are many things (especially pypilot) that do not yet work or features are not yet implemented, that make it almost pointless to upgrade. I wish that I waited and had all the time I wasted on it back. 

Upgrading OP1.0 to 1.2 can be tedious but I have had good luck by setting openplotter in the network tab as client only, then try the update.
This has worked for me each time.
Everything in OP1.2 works, everything is up-gradable from git etc... 


Good luck
Reply


Messages In This Thread
Unable to update from V1.0.0 - by Sailing Infidel - 2019-10-18, 08:57 PM
RE: Unable to update from V1.0.0 - by Luckbert - 2019-10-18, 09:18 PM
RE: Unable to update from V1.0.0 - by pol.bob - 2019-10-21, 02:52 PM
RE: Unable to update from V1.0.0 - by rastam4n - 2019-10-21, 03:31 PM
RE: Unable to update from V1.0.0 - by pol.bob - 2019-10-21, 03:48 PM
RE: Unable to update from V1.0.0 - by Luckbert - 2019-10-21, 02:57 PM
RE: Unable to update from V1.0.0 - by rastam4n - 2019-10-21, 04:18 PM
RE: Unable to update from V1.0.0 - by jim321 - 2019-10-21, 04:36 PM
RE: Unable to update from V1.0.0 - by pol.bob - 2019-10-22, 08:23 AM
RE: Unable to update from V1.0.0 - by jim321 - 2019-10-22, 09:54 AM
RE: Unable to update from V1.0.0 - by pol.bob - 2019-10-22, 12:13 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)