Output from ocpn to N2K

[verkerkbr]

Hi Celestine,

are you sure the nmea183 data is in SignalK. Can you see the items in MXTommy (is SignalK) What does work and what not ? I do not understand why it should not work.

Regards,

Bram

[Celestine]

Hi Celestine,

are you sure the nmea183 data is in SignalK. Can you see the items in MXTommy (is SignalK) What does work and what not ? I do not understand why it should not work.

Regards,

Bram

Yes, RMB, APB and XTE is output from ocpn and converted to Signal K as you can see in the attached screen shot. (this is from OP 1.2 as 2.x still is lacking the diagnostics)
To get this info in n2k the PGNs 127237, 129283 and 129284 are needed but there seem to be no support for these in Signal K-convert-n2k yet.

[verkerkbr]

This what I found:

tkurki commented on 19 Jan 2015

Add support for

129283: Cross Track Error
{"timestamp":"2015-01-15-16:25:14.978","prio":"3","src":"4","dst":"255","pgn":"129283","description":"Cross Track Error","fields":{"SID":"250","Navigation Terminated":"No"}}

129284: Navigation Data
{"timestamp":"2015-01-15-16:25:15.186","prio":"3","src":"4","dst":"255","pgn":"129284","description":"Navigation Data","fields":{"SID":"250"}}

129285: Navigation - Route/WP Information
{"timestamp":"2015-01-15-16:25:12.644","prio":"7","src":"4","dst":"255","pgn":"129285","description":"Navigation - Route/WP Information","fields":{"nItems":"2","Navigation direction in route":"1","Supplementary Route/WP data available":"0","Reserved":"0","Reserved":"0","WP ID":"0","WP ID 2":"1"}}

Ask him Tkurki

Regards

Bram