2019-11-09, 07:46 PM
Hello,
I've installed BerryGPS-IMU v3 and I can see GPS location.
However there is this error message in SignalK logs:
How can I fix this?
BerryGPS-IMU v3 comes with IMU and magnetometer/pressure/temperature/humidity data.
What do I need to set up to get it displayed in OpenCPN dashboard?
It's connected. I see:
[/code]
And it is not in NMEA format.
Thanks,
I've installed BerryGPS-IMU v3 and I can see GPS location.
However there is this error message in SignalK logs:
Code:
[color=#000000]1573318803597;N;$GNTXT,01,01,01,More than 100 frame errors, UART RX was disabled*70[/color]
How can I fix this?
BerryGPS-IMU v3 comes with IMU and magnetometer/pressure/temperature/humidity data.
What do I need to set up to get it displayed in OpenCPN dashboard?
It's connected. I see:
Code:
[color=#000000]pi@raspberrypi:~ $ sudo i2cdetect -y 1
[/color]
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- 1c -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- 6a -- -- -- -- --
[color=#000000]70: -- -- -- -- -- -- -- 77 [/color]
In singalK log I see only pressure
Code:
[code]1573323715732;N;{"updates":[{"$source":"OpenPlotter.I2C.BME280","values":[{"path": "environment.outside.pressure","value":102341.71826815547},{"path": "environment.inside.humidity","value":0.0}]}]}
And it is not in NMEA format.
Thanks,
Download BBN Marine OS for raspberry pi
https://bareboat-necessities.github.io/m...at-os.html
Video of actual installation:
https://www.youtube.com/watch?v=3zMjUs2X3qU
https://bareboat-necessities.github.io/m...at-os.html
Video of actual installation:
https://www.youtube.com/watch?v=3zMjUs2X3qU