This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
WilhelmSK problem (little one)
#1
Hey,

Try to connect WilhelmSK iOS App to SignalK.

When I open app, and go to Raspi Wifi (SSID=openplotter) it recognises my signal K but gives me the following error:

Connection Log:
   Config: Host: openplotter\032(2).local. Port: 3000 REST: http http://openplotter\032(2).local.:3000/signalk/v1/api/ WS: ws://openplotter\032(2).local.:3000/signalk/v1/stream SSL: NO
   Connecting to websockets with (null)
   Sent GET (null) 0
   Error connecting to websocket Error Domain=PSWebSocketErrorDomain Code=3 "Output stream end encountered" UserInfo={NSLocalizedDescription=Output stream end encountered}
   Error sending request: Error Domain=NSURLErrorDomain Code=-1002 "unsupported URL" UserInfo={NSLocalizedDescription=unsupported URL, NSUnderlyingError=0x2806829a0 {Error Domain=kCFErrorDomainCFNetwork Code=-1002 "(null)"}}


What do I do wrong?

Bart
Reply
#2
Can anybody help me with this?
Reply
#3
The support email address is very prominent at the WilhelmSK website, why not help yourself by sending a message there?

https://www.wilhelmsk.com/
Reply
#4
I tried ... no luck ...
Reply
#5
Try Slack and the WilhelmSK thread. Always good support http://slack-invite.signalk.org/
________________________________________

Blog; https://pysselilivet.blogspot.com/
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)