2020-02-08, 09:03 PM
(This post was last modified: 2020-02-08, 09:14 PM by seandepagnier.)
The accuracy for temperature is not important. Voltage is not so important. The accuracy for current and rudder feedback matters a lot more. To give fast reactions to over current with noisy data. Also better resolution will improve the learning pilot since it uses these signals for training. For the regular pilot the accuracy is less important since it only uses rudder and current feedback for end stops, but better resolution can trigger over current at lower currents more reliably which stresses the drive less.
So basically if you have end of travel switches or rudder feedback with the regular pilot it won't really matter at this stage.
So basically if you have end of travel switches or rudder feedback with the regular pilot it won't really matter at this stage.