2020-02-09, 08:25 PM
Hi All,
I had a problem with the I2C app not starting, for reference these are the steps it takes to solve this:
Environment:
RPI-4
Buster lite install from raspberrypi.org
full upgrade: Linux mhopenplotter 4.19.93-v7l+ #1290 SMP Fri Jan 10 16:45:11 GMT 2020 armv7l GNU/Linux
install op & prereq: openplotter-settings_2.0.22-stable.deb
install all OP-apps, except: CAN, Template & MCS
install Moitessier Hat 1
install charts from o-charts.org
Result: everything ok, except I2C App not starting
Solution: apt-get install python3-smbus
I do hope this is helpful for someone...
cheers Erwin
I had a problem with the I2C app not starting, for reference these are the steps it takes to solve this:
Environment:
RPI-4
Buster lite install from raspberrypi.org
full upgrade: Linux mhopenplotter 4.19.93-v7l+ #1290 SMP Fri Jan 10 16:45:11 GMT 2020 armv7l GNU/Linux
install op & prereq: openplotter-settings_2.0.22-stable.deb
install all OP-apps, except: CAN, Template & MCS
install Moitessier Hat 1
install charts from o-charts.org
Result: everything ok, except I2C App not starting
Solution: apt-get install python3-smbus
I do hope this is helpful for someone...
cheers Erwin