2020-05-21, 07:20 PM
(2020-05-21, 05:38 PM)Techstyle Wrote:Thank you techstyle, in the meantime i have checked the plug. And the cable with the problem was the 12 volts cable and i take the power for the converter from another source.(2020-05-13, 05:34 PM)Techstyle Wrote:Quote:I try to find another 3 pin round plug to change directly the one in the cable but i can't find a compatible one. Anyone knows what kind of plug is?
you may want to look at this:
https://www.cruisersforum.com/forums/f13...15150.html
I haven't tried this personally but this llike it may work and I am going to try the ones listed below:
https://www.mouser.com/ProductDetail/Con...witchcraft looks like the 3 connector Female (socket) version @ $8.88
https://www.mouser.com/ProductDetail/Con...witchcraft looks like the 3 connector Male (Pin) @ $5.21
Questions to others:
are the Yakbitz products plug and play with OP2? or is there a guide to adding one? I am especially thinking about the USB version
Tried these connectors and only the male pin one works, the female one does not. I will try to find the mating connector to this one
I don't like this solution but till i find the correct plug (female) i can use it.
Buon vento
Inviato dal mio ANE-LX2 utilizzando Tapatalk