This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
opencpn-hat-? nema prefixes
#1
Big Grin 
Rpi 4 openplotter noob updated  through the openplotter settings window (the gui's are fantastic!) updated 27/2/20
Moitessier HAT 2 with moitessier_4.19.97_1.5.1_armhf.deb

Items which may be opencpn issues  (when looking at the connections in opencpn 10.10.10.1, and specifically the nema Prefix 3 or 5 letter) some are not selected (I found the heel, pitch and pressure, were not there) I also found 2 or 3 version of the AIS prefix not selected? adding the pitch heel, and pressure brought them through to opencpn [Image: biggrin.png] but using the simulator from the hat (with correct range in opencpn) i am still missing the AIS data. I am pretty sure the data is in K but Maybe the default openCPN setup is ?

I am not sure we all say this, but THANKS for OPENPLOTTER!!!!! it is very nice even in bata!

One note, I am using a 64G SD I started with gparted,and  two partisions one fat32 and one ext4, I did find running the noob,  that I now have one 63G partition, hope I did not make the above omissions happen via the over 32G ?

Also on cold boot, finding the temp and press missing but opening the I2C settings window and selecting each then edit and accept (without any changes) all is connected, I also have needed to do this a couple of times for the serial settings?  (regarding the hat)?

Hope this provides some help (or maybe questions) during the bata testing Thanks again :
Norm
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)