This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
GPS calibration
#1
Hello,

Chart plotter assumes GPS position mid ship. 
However GPS measures its position where its antenna is
located which can be depending on the size of the ship
far from midship. Moreover there could
be multiple GPS receivers with different 
antennas placement. Is there way to tell
openplotter location of antennas and calibrate
all gps so let’s say signalK would feed 
chartplotter with accurate midship position from
all GPS receivers?

Thanks,
—MG
Reply
#2
In SignalK "Server => Vessel data" You can input the GPS distance from Bow/Center.
If You have more than one GPS, maybe Slack for SignalK will help You getting direct contact with the developers.
________________________________________

Blog; https://pysselilivet.blogspot.com/
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)