Missing Sources

[Opie91]

Did an add source to check for new apps. All the apps except XyGrib displayed "missing source" in the candidate column.

Is something going on with the repositories?

[Lazzz]

Did an add source to check for new apps. All the apps except XyGrib displayed "missing source" in the candidate column.

Is something going on with the repositories?

Me too ?????

[fishy]

There must have been a glitch somewhere- had the same thing last night, but after half an hour it worked normally again.
Interestingly, new packages were seen by apt-get upgrade...

[Lazzz]

There must have been a glitch somewhere- had the same thing last night, but after half an hour it worked normally again.
Interestingly, new packages were seen by apt-get upgrade...

Yep, all good for me now but missing MCS & OpenCpn Installer in the settings app??

[Max1947]

Hi Sailoog, are you updating? As you can see some "Apps" are gone. Sorry if I insist, just to understand ... Thanks.

[img][/img]

[Sailoog]

About sources:
We have tried to change sources from ubuntu PPA to cloudsmith.io to optimize the package building process but finally we have came back to PPA. Everything should work now.

About missing apps:
http://forum.openmarine.net/showthread.p...2#pid12762

[Celestine]

Hello
Sorry but I still have this problem. “missing source”
Pressed Add Sources and Update Candidates several times without success.
Cheers
Pär W

[Sailoog]

Settings app version?

what are the missing sources?

Press Update candidates and copy here the output

[Celestine]

Settings app version?

what are the missing sources?

Press Update candidates and copy here the output

Hi,
Settings app version: 2.0.27-stable
Missing sources is that I get 
missing source: https://dl.cloudsmith.io/public/openplot...deb/debian

This is what I get after pressing Update Candidates:

Hit:1 http://archive.raspberrypi.org/debian buster InRelease
Get:2 http://raspbian.raspberrypi.org/raspbian buster InRelease [15.0 kB]
Hit:3 https://repos.influxdata.com/debian buster InRelease
Hit:4 https://deb.nodesource.com/node_10.x buster InRelease
Hit:5 https://packages.grafana.com/oss/deb stable InRelease
Hit:6 http://ppa.launchpad.net/opencpn/opencpn/ubuntu bionic InRelease
Hit:7 http://ppa.launchpad.net/openplotter/openplotter/ubuntu bionic InRelease
Hit:8 https://www.free-x.de/debian buster InRelease
Get:9 https://dl.cloudsmith.io/public/openplot...deb/debian buster InRelease [5,524 B]
Fetched 20.5 kB in 4s (4,743 B/s)
Reading package lists...
Building dependency tree...
Reading state information...
23 packages can be upgraded. Run 'apt list --upgradable' to see them.

When I run apt list --upgradable I get:

pi@openplotter:~ $ sudo apt list --upgradable

Listing... Done
canboat/bionic 1.2.4-stable armhf [upgradable from: 1.2.3-1buster~bionic1]
curl/stable 7.64.0-4+deb10u1 armhf [upgradable from: 7.64.0-4]
gldriver-test/testing 0.6 armhf [upgradable from: 0.5]
libcurl3-gnutls/stable 7.64.0-4+deb10u1 armhf [upgradable from: 7.64.0-4]
libcurl4/stable 7.64.0-4+deb10u1 armhf [upgradable from: 7.64.0-4]
lxinput/testing 0.3.5-1+rpi7 armhf [upgradable from: 0.3.5-1+rpi6]
lxplug-cputemp/testing 0.3 armhf [upgradable from: 0.1]
lxplug-network/testing 0.19 armhf [upgradable from: 0.18]
lxplug-ptbatt/testing 0.9 armhf [upgradable from: 0.8]
openplotter-doc/bionic 2.0.6-dev all [upgradable from: 2.0.5-dev]
openplotter-mcs/bionic 2.0.1-dev all [upgradable from: 2.0.0-dev]
openplotter-network/bionic 2.1.1-stable all [upgradable from: 2.0.11-beta]
openplotter-serial/bionic 2.1.0-stable all [upgradable from: 2.0.5-stable]
openplotter-settings/bionic 2.1.0-stable all [upgradable from: 2.0.27-stable]
openplotter-skfilter/bionic 2.0.1-dev all [upgradable from: 2.0.0-dev]
pcmanfm/testing 1.3.1-1+rpt19 armhf [upgradable from: 1.3.1-1+rpt18]
pipanel/testing 1:1.4 armhf [upgradable from: 1:1.3]
piwiz/testing 0.11 armhf [upgradable from: 0.9]
raspi-config/testing 20200226 all [upgradable from: 20200207]
rc-gui/testing 1.38 armhf [upgradable from: 1.36]
rp-prefapps/testing 0.18 armhf [upgradable from: 0.17]
rpi-eeprom-images/testing 5.0-2 all [upgradable from: 4.0-1]
rpi-eeprom/testing 5.0-2 armhf [upgradable from: 4.0-1]
pi@openplotter:~ $ ^C

Hope this helps!
Cheers,
Par W

[Opie91]

Sailoog,

Is this pointing to the right repository? Settings version installed 2.0.27

Thanks!