This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Boot Raspberry Pi / OpenPlotter 2 From USB SSD
#11
@Sailoog,

Thanks for the quick reply.  I flashed back to the production firmware and all is well again.  It looks like the original solution, from the 1'st post, will be the only way to boot from a USB SSD until the new beta kernel is put into production.

This is good information.  Many have been waiting for the pi 4 to receive native boot from USB, and many, as I did, rushed and will rush to try the beta kernel.  When the production kernel is updated and it is safe, I'll post here.

For anyone who did try the beta kernel, getting back to safety is quite easy as outlined in the article that @Sailoog referenced above.  The commands are pasted below:

sudo apt-get update
sudo apt install --reinstall libraspberrypi0 libraspberrypi-{bin,dev,doc} raspberrypi-bootloader raspberrypi-kernel
Reply


Messages In This Thread
RE: Boot Raspberry Pi / OpenPlotter 2 From USB SSD - by jamieFL - 2020-05-26, 01:00 PM

Forum Jump:


Users browsing this thread: 2 Guest(s)