2020-04-23, 10:30 AM
(2020-04-22, 06:34 PM)Sailoog Wrote:(2020-04-22, 06:14 PM)verkerkbr Wrote: At first I tried this on my AMD64 system. Install from the OpenPlotter Settings gave an error about a postinstall.... file missing.
Then I installed the application from Synaptic. No error with the installation. Switched on the Ais application.
It seems to be working. But looking at the "sudo systemctl status openplotter-rtl_ais.service". There the outcome is displayed as "disabled". Switched the autostrart on and rebooted the system. Now the message is "enabled" . However I have not seen any objects passing by. But perhaps there are no ships here at rhe moment.
Then I did the same thing on my RPI4 with the V8 kernel. All seems to work. Message enabled.
But in the end i get the message:
Detected Kernel usbfs nmap () bug. falling back to buffers in userspace.
Bram
what was the missing file in your AMD?
That is the expected behavior for enable/disable status
You need to provide the correct ppm to see AIS blanks and to have some ship around of course
I can not help with errors with beta kernel because we use only stable kernels to develop
Hi Sailoog,
AMD64
problem with AMD64 seems to be solved. I cannot reconstruct the error. But still no ships to be seen.
RPI4
The RPI4 problem. Seems to related to the RPI 4 kernels.
https://www.raspberrypi.org/forums/viewt...p?t=244735
Thanks for all your effort to make OpenPlotter the perfect system to be used with SignalK.
Regards,
Bram