This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
SDR AIS available in OpenPlotter 2
#37
(2020-04-29, 01:24 PM)holgerw Wrote:
(2020-04-29, 12:43 PM)Przemek Wrote: Hi, when I install openplotter in my ubuntu laptop I see only GPS (/dev/ttyACM1) in Serial app. I open SDR VHF app, make calibration and after all process openplotter add automatic connection to my signalK server.

Regards Przemek

Hello Przemek

This is normal, only GPS is an serial Port.
The SDR-RTL Communication goes per Network with some help on translating the internal Audiosignal 
to NMEA ASCII Strings. The normal RTL-SDR Sticks have no Serial Port.

But there are other AIS-Receiver available, who do this, they have an Serial Port with the AIS Data.

PS: I also use these Sticks from NOOELEC

sudo systemctl status openplotter-rtl_ais.service 
* openplotter-rtl_ais.service - Decode AIS received by rtl-sdr and send as NMEA 0183 to UDP port
   Loaded: loaded (/etc/systemd/system/openplotter-rtl_ais.service; enabled; vendor preset: enabled)
   Active: active (running) since Wed 2020-04-29 13:09:25 CEST; 1h 4min ago
 Main PID: 1686 (rtl_ais)
    Tasks: 4 (limit: 4915)
   Memory: 1.2M
   CGroup: /system.slice/openplotter-rtl_ais.service
           `-1686 /usr/bin/rtl_ais -d 0 -p 1 -P 10110

Apr 29 13:09:25 Wilhelmina rtl_ais[1686]: Output: 48000 Hz
Apr 29 13:09:25 Wilhelmina rtl_ais[1686]: Detached kernel driver
Apr 29 13:09:25 Wilhelmina rtl_ais[1686]: Found Rafael Micro R820T tuner
Apr 29 13:09:26 Wilhelmina rtl_ais[1686]: Log NMEA sentences to console OFF
Apr 29 13:09:26 Wilhelmina rtl_ais[1686]: AIS data will be sent to 127.0.0.1 port 10110
Apr 29 13:09:26 Wilhelmina rtl_ais[1686]: Tuner gain set to automatic.
Apr 29 13:09:26 Wilhelmina rtl_ais[1686]: Tuner error set to 1 ppm.
Apr 29 13:09:26 Wilhelmina rtl_ais[1686]: Tuned to 162000000 Hz.
Apr 29 13:09:26 Wilhelmina rtl_ais[1686]: Sampling at 1600000 S/s.
Apr 29 13:09:26 Wilhelmina rtl_ais[1686]: Allocating 12 zero-copy buffers

Holger

Hi @holgerw. 
Thank You very much for answer. I will check everything after that pandemic ends and I will go to my father's boat. If I will have some issues I will post here Smile

Regards Przemek
Reply


Messages In This Thread
SDR AIS available in OpenPlotter 2 - by Sailoog - 2020-04-20, 07:26 PM
RE: SDR AIS available in OpenPlotter 2 - by dione - 2020-04-21, 08:39 PM
RE: SDR AIS available in OpenPlotter 2 - by Przemek - 2020-04-29, 01:29 PM
SDR AIS available in OpenPlotter 2 - by tkurki - 2020-04-30, 08:23 PM
SDR AIS available in OpenPlotter 2 - by holgerw - 2020-05-01, 11:46 PM
RE: SDR AIS available in OpenPlotter 2 - by ckon - 2020-05-08, 02:09 PM
SDR AIS available in OpenPlotter 2 - by Techstyle - 2020-05-10, 04:12 PM
RE: SDR AIS available in OpenPlotter 2 - by mau - 2020-05-13, 06:29 PM
RE: SDR AIS available in OpenPlotter 2 - by W_LAY - 2020-08-21, 09:24 AM
RE: SDR AIS available in OpenPlotter 2 - by Loxon - 2020-09-27, 08:16 PM
RE: SDR AIS available in OpenPlotter 2 - by Loxon - 2020-09-30, 03:09 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)