2020-04-30, 07:13 PM
(2020-04-29, 12:39 PM)holgerw Wrote:(2020-04-29, 11:21 AM)Sailoog Wrote: Then you should send all NMEA 0183 data to Signal K so using the serial app for the gps and the sdr app for the sdr device is the correct way.
Hello Saillog
eventually you could add an Checkbox to the SDR-RTL App (daemon) to log the Stations on the Console?
default: /usr/bin/rtl_ais -d 0 -p 0 -P 10110
logging: /usr/bin/rtl_ais -d 0 -p 0 -P 10110 -n
and if you are working here, the App won´t remember the GSM & PPM Numbers, like your old 1.2 V. did.
Great Work, stay well.
Holger
I am afraid enabling console output is not possible because data would be sed to syslog too creating huge files.
the app should remember the ppm value but not the GSM data. this is intentional because GSM values change with your position.