2020-08-21, 09:24 AM
Hi,
Launch OpenPlotter application and go to settings (options).
Then to "connexions", you can add a UDP connection (in your case, to localhost, port 10110, or else such as marinetraffic, etc if you want)
You can maybe re-install gqrx but kalibrate app or one used by SDR VHF should be enough. An easy way to install kalibrate is to write "kalibrate" on "add/remove software", then kal -c 900, and when you get the strongest channel, kal -s "Channel"
Some helps on youtube : https://www.youtube.com/watch?v=iQIbGFw2Cp0
or that one (better) : https://www.youtube.com/watch?v=r8CGixMl18k&t=470s
Good luck,
WL
Launch OpenPlotter application and go to settings (options).
Then to "connexions", you can add a UDP connection (in your case, to localhost, port 10110, or else such as marinetraffic, etc if you want)
You can maybe re-install gqrx but kalibrate app or one used by SDR VHF should be enough. An easy way to install kalibrate is to write "kalibrate" on "add/remove software", then kal -c 900, and when you get the strongest channel, kal -s "Channel"
Some helps on youtube : https://www.youtube.com/watch?v=iQIbGFw2Cp0
or that one (better) : https://www.youtube.com/watch?v=r8CGixMl18k&t=470s
Good luck,
WL