2020-09-04, 10:25 PM
Hello,
I'm trying to run the SDR VHF installer. The dongle is correctly identified and I can get a PPM reading for it, but when I try to find any GSM900 channels the scanner just runs and returns nothing (same happens with all bands). Also the AIS process is dead as a good friday. I can't open the dvb-t tv tuner and GQRX radio has the play button greyed out.
Any pointers on how to proceed?
when running the PPM scanner, it returns:
Found 1 device(s):
0: Realtek, Rtl2832UDVB, SN: 0
Using device 0: Dexatek DK DVB-T Dongle (Logilink VG0002A)
Found FCI 2580 tuner
Supported gain values (1): 0.0
Sampling at 2048000 S/s.
Reporting PPM error measurement every 10 seconds...
Press ^C after a few minutes.
Reading samples in async mode...
Allocating 15 zero-copy buffers
lost at least 88 bytes
I'm trying to run the SDR VHF installer. The dongle is correctly identified and I can get a PPM reading for it, but when I try to find any GSM900 channels the scanner just runs and returns nothing (same happens with all bands). Also the AIS process is dead as a good friday. I can't open the dvb-t tv tuner and GQRX radio has the play button greyed out.
Any pointers on how to proceed?
when running the PPM scanner, it returns:
Found 1 device(s):
0: Realtek, Rtl2832UDVB, SN: 0
Using device 0: Dexatek DK DVB-T Dongle (Logilink VG0002A)
Found FCI 2580 tuner
Supported gain values (1): 0.0
Sampling at 2048000 S/s.
Reporting PPM error measurement every 10 seconds...
Press ^C after a few minutes.
Reading samples in async mode...
Allocating 15 zero-copy buffers
lost at least 88 bytes