2020-12-08, 01:36 PM
Hi.
I'm using SDR VHF 2.1.1 and the newest openplotter available for download. I'm trying to calibrate my AIS, have followed the guide, but when I try to calibrate the device, it start to do it's thing, but when I press ctrl+c, the terminal window closes so fast, I cant read the result.
When I try to execute "rtl_test" in a new terminal window, it stops at:
//
Found 1 device(s):
0: Realtek, RTL2838UHIDIR, SN: AIS
Using device 0: Generic RTL2832U OEM
Found Rafael Micro R820T tuner
Supported gain values (29): 0.0 0.9 1.4 2.7 3.7 7.7 8.7 12.5 14.4 15.7 16.6 19.7 20.7 22.9 25.4 28.0 29.7 32.8 33.8 36.4 37.2 38.6 40.2 42.1 43.4 43.9 44.5 48.0 49.6
[R82XX] PLL not locked!
Sampling at 2048000 S/s.
Info: This tool will continuously read from the device, and report if
samples get lost. If you observe no further output, everything is fine.
Reading samples in async mode...
Allocating 15 zero-copy buffers
lost at least 8 bytes
//
Anyone know what I'm doing wrong?
I'm using SDR VHF 2.1.1 and the newest openplotter available for download. I'm trying to calibrate my AIS, have followed the guide, but when I try to calibrate the device, it start to do it's thing, but when I press ctrl+c, the terminal window closes so fast, I cant read the result.
When I try to execute "rtl_test" in a new terminal window, it stops at:
//
Found 1 device(s):
0: Realtek, RTL2838UHIDIR, SN: AIS
Using device 0: Generic RTL2832U OEM
Found Rafael Micro R820T tuner
Supported gain values (29): 0.0 0.9 1.4 2.7 3.7 7.7 8.7 12.5 14.4 15.7 16.6 19.7 20.7 22.9 25.4 28.0 29.7 32.8 33.8 36.4 37.2 38.6 40.2 42.1 43.4 43.9 44.5 48.0 49.6
[R82XX] PLL not locked!
Sampling at 2048000 S/s.
Info: This tool will continuously read from the device, and report if
samples get lost. If you observe no further output, everything is fine.
Reading samples in async mode...
Allocating 15 zero-copy buffers
lost at least 8 bytes
//
Anyone know what I'm doing wrong?