Thanks Sean
I am running OP in AP/client mode, I will switch to client mode only and see if that solves the disconnections.
I am interested in the keypad option you have suggested, can you identify the pins for me? and what sort of keypad would I need?
If I was going to go through the trouble I may as well make it functional, I would want to engage/disengage then 4 buttons for forward/reverse for small and large heading change. Is it just a matter of closing a circuit from each pin to ground?
I have a bunch of these would they work?
https://www.amazon.com/dp/B071KX71SV?tag...th=1&psc=1
Or maybe something like this
https://www.alibaba.com/product-detail/C...n4kiFo&s=p
Or is a matrix keypad needed?
https://www.adafruit.com/product/419
I like this one... would it work?
https://www.mouser.ca/ProductDetail/Gray...prjA%3D%3D
I am running OP in AP/client mode, I will switch to client mode only and see if that solves the disconnections.
I am interested in the keypad option you have suggested, can you identify the pins for me? and what sort of keypad would I need?
If I was going to go through the trouble I may as well make it functional, I would want to engage/disengage then 4 buttons for forward/reverse for small and large heading change. Is it just a matter of closing a circuit from each pin to ground?
I have a bunch of these would they work?
https://www.amazon.com/dp/B071KX71SV?tag...th=1&psc=1
Or maybe something like this
https://www.alibaba.com/product-detail/C...n4kiFo&s=p
Or is a matrix keypad needed?
https://www.adafruit.com/product/419
I like this one... would it work?
https://www.mouser.ca/ProductDetail/Gray...prjA%3D%3D