2020-05-04, 10:47 AM
thanks for sharing. some details:
- Page 3 says: "Press apply when finished. While in Signal K, goto Plugin Config and look at "Convert Signal K to NMEA0183". Set as active and check: GGA, HDG, HDM, RMB, RMC." and that is not correct, if you send NMEA 0183 data, it will be converted to SK format but it will be also send to TCP 10110 in NMEA 0183 format so no conversion is required.
- Is the LSM9DS1 or LSM9DS0 IMU? does it calibrate? I have one of them but not tested yet.
- BMP280 or BMP180 are not supported yet but you are using BME280 and MS6607... settings, is this working?
- Page 3 says: "Press apply when finished. While in Signal K, goto Plugin Config and look at "Convert Signal K to NMEA0183". Set as active and check: GGA, HDG, HDM, RMB, RMC." and that is not correct, if you send NMEA 0183 data, it will be converted to SK format but it will be also send to TCP 10110 in NMEA 0183 format so no conversion is required.
- Is the LSM9DS1 or LSM9DS0 IMU? does it calibrate? I have one of them but not tested yet.
- BMP280 or BMP180 are not supported yet but you are using BME280 and MS6607... settings, is this working?