Whoa what a fast reply, thanks!
So, good to know i don't have to install -raspi version. Noted. Luckily nothings seems to be broken.
As for showing my own boat -> Solved. I had already ctrl+F5 the browser, but most likely i was to fast before AvNav had finished restarting. Did it again and now it works like it used too, indeed.
Also found the SignalKHandler and setup some settings, but i get this AIS error at the end:
Code:
[13]SignalKHandler
main connected at http://localhost:3000/signalk/v1/api/
source avnav-6235dc23-c724-4d97-957d-aacde2a16553
alarms active
websocket connected at ws://localhost:3000/signalk/v1/stream, timeOffset=-0s
authentication successfully retrieved token for pi
write connected at ws://localhost:3000/signalk/v1/stream, timeOffset=-0s
charts read 0 charts
ais error reading ais data from http://openplotter:3000/signalk/v1/api/vessels/:'int' object has no attribute 'partition'
I can confirm that reaching this url
http://openplotter:3000/signalk/v1/api/vessels/ actually return a list of vessels.
Maybe is worth saying that AIS sent via nmea are still shown.
Not sure if it's still relevant but the client runs on chrome v100, on a win10 desktop machine.
I just noticed that my own boat appears as an AIS target