2022-04-12, 07:30 PM
Hey there. I just tried the last daily build I found, but i think i did something wrong because i get a number of errors:
I also installed avnav_20220410_all.deb just in case the "raspi" one was not the one i was supposed to install.
Now i don't see my own boat, even if COG and SOG is properly displayed. Also AIS targets are not fetched directly from SignalK, the solution is still to forward nmea sentences.
I know is a daily build, so no complains, just letting you know
Code:
pi@openplotter:~/Downloads $ sudo dpkg -i avnav-raspi_20220410_all.deb
(Reading database ... 124560 files and directories currently installed.)
Preparing to unpack avnav-raspi_20220410_all.deb ...
Unpacking avnav-raspi (20220410) over (20220328) ...
Setting up avnav-raspi (20220410) ...
Failed to stop check_parts.service: Unit check_parts.service not loaded.
check_parts not running
Failed to stop check_wlan.service: Unit check_wlan.service not loaded.
check_wlan not running
stopping and disabling gpsd
Synchronizing state of gpsd.service with SysV service script with /lib/systemd/systemd-sysv-install.
Executing: /lib/systemd/systemd-sysv-install disable gpsd
migrating old config /home/pi/avnav/data/avnav_server.xml
checking existing /etc/wpa_supplicant/wpa_supplicant.conf
country already set
socket setting ok
removing /var/lib/ntp/ntp.conf.dhcp
Failed to disable unit: Unit file dhcpd.service does not exist.
dhcpd not running, dont need to disable
Failed to stop dhcpd.service: Unit dhcpd.service not loaded.
dhcpd not running, dont need to disable
Synchronizing state of dhcpcd.service with SysV service script with /lib/systemd/systemd-sysv-install.
Executing: /lib/systemd/systemd-sysv-install disable dhcpcd
Synchronizing state of ntp.service with SysV service script with /lib/systemd/systemd-sysv-install.
Executing: /lib/systemd/systemd-sysv-install disable ntp
Unit /etc/systemd/system/ntp.service is masked, ignoring.
pi@openplotter:~/Downloads $
I also installed avnav_20220410_all.deb just in case the "raspi" one was not the one i was supposed to install.
Now i don't see my own boat, even if COG and SOG is properly displayed. Also AIS targets are not fetched directly from SignalK, the solution is still to forward nmea sentences.
I know is a daily build, so no complains, just letting you know