2020-07-23, 03:58 PM
(2020-06-01, 08:48 PM)seandepagnier Wrote: By default nmea input is on port 20220 tcp. You can also set a nmea client with host and port which is a tcp client. udp is not supported right now.
Hi,
Sorry for the slight off-topic.
But what about using an ESP32/8632 with a CAN/RS485 adapter, just reading the serial and streaming to the port 20220tcp? Working as AP or conecting to the current wifi onboard
Sorry for the stupid thought, I am just learning about autopilot.
Regards