2021-06-19, 12:36 PM
Hi Everybody ! We have the same problem.
Raspberry Pi 4B+
Moitessier Hat 2
and no GPS working.
We are not using any USB3.
I have this message When starts the system:
"The service GPIO is stopped"
"The access request must be approved with read / write permissions in the administrator signal K"
Also in OpenCPN conections:
"✓NMEA: data filter COG and speed
[] Open the data display window NMEA
[] Download format for furuno GP3X
[] Use garmin GRMN (host) mode for downloading.
[] NMEA: For (ECAPB) use, on output, the heading of the magnetic compass instead of the COG of the GPs."
My big problem is, im not used to do this kind of stuffs, so im Lost.
I have some screenshots but i dont know how to upload them here.
Thanks for your help!
Have a great day ?
Astrea.
Raspberry Pi 4B+
Moitessier Hat 2
and no GPS working.
We are not using any USB3.
I have this message When starts the system:
"The service GPIO is stopped"
"The access request must be approved with read / write permissions in the administrator signal K"
Also in OpenCPN conections:
"✓NMEA: data filter COG and speed
[] Open the data display window NMEA
[] Download format for furuno GP3X
[] Use garmin GRMN (host) mode for downloading.
[] NMEA: For (ECAPB) use, on output, the heading of the magnetic compass instead of the COG of the GPs."
My big problem is, im not used to do this kind of stuffs, so im Lost.
I have some screenshots but i dont know how to upload them here.
Thanks for your help!
Have a great day ?
Astrea.