This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
How to configure SignalK
#1
After the last update to SignalK 1.31.0, the lives of us mortals have complicated. OpenCPN no longer receives signals from SK. I understand that everything must be configured but without adequate instructions it has become almost impossible. If you then google to translate the technical terms in an absurd way it's done. I don't want to give up on OP but it's hard!  
However, help is always welcome. Good wind!  Huh Cool


[img][Image: gEQ4bt.png][/img]
Reply
#2
What are you specifically talking about? Nothing significant has changed in how things are configured in recent SK server updates.


Sent from my iPhone using Tapatalk
Reply
#3
(2020-06-27, 06:31 AM)tkurki Wrote: What are you specifically talking about? Nothing significant has changed in how things are configured in recent SK server updates.


Sent from my iPhone using Tapatalk

Hi Tkurki, sorry for the outburst, for example as you can see from the photo "rool and pitch" are no longer transmitted in OpenCPN. Sensors and pypilots have long been configured and have always transmitted well. All on Pi4 with Moitessier and aggioirnamenti facts.  Sad

https://i.imgur.com/YKebsUe.png
https://i.imgur.com/T0O1qQt.png
Reply
#4
Install the @signalk/signalk-to-nmea0183 app, select XDR and activate >

[Image: hQ1Uj2S.png]
Reply
#5
(2020-06-27, 12:25 PM)PaddyB Wrote: Install the @signalk/signalk-to-nmea0183 app, select XDR and activate >

[Image: hQ1Uj2S.png]
Ciao PaddyB and thank you, however, as you see, installed and selected. I'll try to reinstall SignalK Server to see if anything changes!

https://i.imgur.com/rjsX8WS.png
Reply
#6
Why don’t you first make sure your system is receiving those inputs in Signal K.

I am not aware anything wrong systematically with the SK update process. If there is I’d oike to fix it.


Sent from my iPhone using Tapatalk
Reply
#7
(2020-06-27, 01:49 PM)Max1947 Wrote: Ciao PaddyB and thank you, however, as you see, installed and selected. I'll try to reinstall SignalK Server to see if anything changes!

https://i.imgur.com/rjsX8WS.png

Signalk will be sending out XDR Nmea messages then, on port 10110. Your barometer doesn't seem to be getting any data either, is the nmea converter definitely enabled? Opencpn set to receive nmea on port 10110?
Reply
#8
@PaddyB, You mean these: 

https://i.imgur.com/jfE4Lr9.png
https://i.imgur.com/1fdGo44.png
https://i.imgur.com/vMHpR0Q.png

(2020-06-27, 01:58 PM)tkurki Wrote: Why don’t you first make sure your system is receiving those inputs in Signal K.

I am not aware anything wrong systematically with the SK update process. If there is I’d oike to fix it.


Sent from my iPhone using Tapatalk

(2020-06-27, 02:01 PM)PaddyB Wrote:
(2020-06-27, 01:49 PM)Max1947 Wrote: Ciao PaddyB and thank you, however, as you see, installed and selected. I'll try to reinstall SignalK Server to see if anything changes!

https://i.imgur.com/rjsX8WS.png

Signalk will be sending out XDR Nmea messages then, on port 10110. Your barometer doesn't seem to be getting any data either, is the nmea converter definitely enabled? Opencpn set to receive nmea on port 10110?

@Tkurki, this is what I see in SK:
https://i.imgur.com/euZq7Ql.png

and this the OpenCPN:
https://i.imgur.com/74ldrqX.png

if I have to do anything else (copy / paste, I can only do) let me know and thanks anyway!
Reply
#9
(2020-06-27, 02:08 PM)Max1947 Wrote: @PaddyB, You mean these: 

https://i.imgur.com/jfE4Lr9.png
https://i.imgur.com/1fdGo44.png
https://i.imgur.com/vMHpR0Q.png

Opencpn looks like it's connecting to the right place, is the plugin turned on and working? 
Should show up in the dashboard >
[Image: Ln3JxJp.png]

And you could try this command in a terminal to see if any XDR sentences are getting created >

Quote:cat </dev/tcp/10.10.10.1/10110|grep 'XDR'

[Image: ifCkMA7.png]
Reply
#10
(2020-06-27, 02:25 PM)PaddyB Wrote:
(2020-06-27, 02:08 PM)Max1947 Wrote: @PaddyB, You mean these: 

https://i.imgur.com/jfE4Lr9.png
https://i.imgur.com/1fdGo44.png
https://i.imgur.com/vMHpR0Q.png

Opencpn looks like it's connecting to the right place, is the plugin turned on and working? 
Should show up in the dashboard >
[Image: Ln3JxJp.png]

And you could try this command in a terminal to see if any XDR sentences are getting created >

Quote:cat </dev/tcp/10.10.10.1/10110|grep 'XDR'

[Image: ifCkMA7.png]@
@PaddyB, vedi:
https://i.imgur.com/GS52fgE.png
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)