This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ARGON40 Users
#1
It seems there is a conflict between ARGON40 case ON / OFF button & Open plotter ...

Did so had the same issue, what was(is) the solution ?
Cordialement
Didier B
Pi4, SSD USB3, OP 3.0 Touch SK 3.2.1 OpenCPN  5.8.4 :  Thank you  Thank you  Thank you


Reply
#2
I just looked at their script. It appears they use GPIO4 for the switch pin.

Perhaps that's a conflict with something in OP?
Reply
#3
(2020-07-10, 02:12 PM)abarrow Wrote: I just looked at their script. It appears they use GPIO4 for the switch pin.

Perhaps that's a conflict with something in OP?
yes, probably, I think it is used by 1-wire. I will re-test deactivating 1 wire

(2020-07-10, 04:14 PM)Didier B Wrote:
(2020-07-10, 02:12 PM)abarrow Wrote: I just looked at their script. It appears they use GPIO4 for the switch pin.

Perhaps that's a conflict with something in OP?
yes, probably, I think it is used by 1-wire. I will re-test deactivating 1 wire

Bingo, that is the good work around, no 1 Wire until I can modify the Argon script !
So far so good
Thanks Abarrow !
Cordialement
Didier B
Pi4, SSD USB3, OP 3.0 Touch SK 3.2.1 OpenCPN  5.8.4 :  Thank you  Thank you  Thank you


Reply
#4
(2020-07-10, 04:14 PM)Didier B Wrote: Bingo, that is the good work around, no 1 Wire until I can modify the Argon script !
So far so good
Thanks Abarrow !

Glad it worked. Here is my latest case. A little more rustic!
https://photos.app.goo.gl/E2XAozXoLGi4ffUa9
Reply
#5
(2020-07-10, 05:13 PM)abarrow Wrote:
(2020-07-10, 04:14 PM)Didier B Wrote: Bingo, that is the good work around, no 1 Wire until I can modify the Argon script !
So far so good
Thanks Abarrow !

Glad it worked. Here is my latest case. A little more rustic!
https://photos.app.goo.gl/E2XAozXoLGi4ffUa9

Waow, it's so chic Andy !
Cordialement
Didier B
Pi4, SSD USB3, OP 3.0 Touch SK 3.2.1 OpenCPN  5.8.4 :  Thank you  Thank you  Thank you


Reply
#6
(2020-07-10, 05:13 PM)abarrow Wrote:
(2020-07-10, 04:14 PM)Didier B Wrote: Bingo, that is the good work around, no 1 Wire until I can modify the Argon script !
So far so good
Thanks Abarrow !

Glad it worked. Here is my latest case. A little more rustic!
https://photos.app.goo.gl/E2XAozXoLGi4ffUa9

Really???? update please Big Grin
Reply
#7
Are you talking about my rustic case or Didier's fix for his Argon case problem? ;-)
Reply
#8
Your rustic case of course Smile
Reply
#9
LOL. Relatively inexpensive decorative box from Banggood, an SSD adapter with a Suptronics X710 power / cooling module.

There's also a board taken from the inside of a Plugable 7 port USB hub. That's about it. I 3D printed a nice panel for the back for HDMI and power connection, as well as openings for ventilation.

I just finished rebuilding my switchpanel and nav station - I couldn't bring myself to put a plastic box there!
Reply
#10
publish some pictures when you are done and we could add a link here: https://openplotter.readthedocs.io/en/la...mples.html
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)