problem installing moitessier firmware [closed]

[Luckbert]

Hello, Sailoog,
1. Linux openplotter 5.4.51-v7+ #1327 SMP Thu Jul 23 10:58:46 BST 2020 armv7l GNU/Linux

2. pi@openplotter:~/Downloads $ sudo dpkg -i moitessier_1.20200723-1_5.4.51_2.1.0_armhf.deb
(Reading database ... 101426 files and directories currently installed.)
Preparing to unpack moitessier_1.20200723-1_5.4.51_2.1.0_armhf.deb ...
Unpacking moitessier (2.1.0) over (2.1.0) ...

******************************************************************************************
Running post remove... (upgrade)
******************************************************************************************


******************************************************************************************
Nothing to do
******************************************************************************************

Setting up moitessier (2.1.0) ...

******************************************************************************************
Running post install...
******************************************************************************************

/etc/systemd/system/moitessier.shutdown.service

******************************************************************************************
File /etc/systemd/system/moitessier.shutdown.service deleted.
******************************************************************************************

[Unit]
Description=Moitessier Shutdown

[Service]
ExecStart=/home/pi/moitessier/scripts/system_shutdown
Restart=always

[Install]
WantedBy=multi-user.target

******************************************************************************************
Setting up interfaces...
******************************************************************************************

moitessier: setting up /etc/modules
i2c-dev

******************************************************************************************
Updating HAT firmware...
******************************************************************************************


******************************************************************************************
This script is used to flash the STM32 microcontroller on the Moitessier HAT.

One of the following options can be applied:
-r : Will load the latest firmware release from the remote repository https://github.com/mr-rooney/moitessier-firmware.git.
The firmware will be located in "./fw/application.binary".
-s : Specifies the firmware that should be used.
This option requires the path + filename as parameter
-f : Forces the Raspberry Pi to shutdown after firmware update. A shutdown + power cycle
is required only for virgin Moitessier HATs without any firmware.

Note: Options -s and -r must not be applied at the same time!!
******************************************************************************************


******************************************************************************************
Determining I2C GPIO device
******************************************************************************************


******************************************************************************************
I2C GPIO device: 3
******************************************************************************************


******************************************************************************************
The firmware file "application.binary" is used for the update
******************************************************************************************


******************************************************************************************
Terminating running processes...
******************************************************************************************


******************************************************************************************
"kplex" not running
******************************************************************************************


******************************************************************************************
"gpsd" not running
******************************************************************************************


******************************************************************************************
"opencpn" not running
******************************************************************************************


******************************************************************************************
"node" killed
******************************************************************************************

.....................................

******************************************************************************************
Flashing firmware.
******************************************************************************************

stm32flash 0.5

http://stm32flash.sourceforge.net/

Using Parser : Raw BINARY
Warning: Not a tty: /dev/i2c-3
Error probing interface "serial_posix"
Interface i2c: addr 0x41

GPIO sequence start
setting gpio 18 to 1... OK
delay 100000 us
delay 100000 us
delay 100000 us
setting gpio 17 to 1... OK
delay 100000 us
delay 100000 us
delay 100000 us
setting gpio 18 to 0... OK
delay 100000 us
delay 100000 us
delay 100000 us
delay 100000 us
delay 100000 us
setting gpio 18 to 1... OK
delay 100000 us
delay 100000 us
GPIO sequence end

size = 131072
Version : 0x10
Device ID : 0x0442 (STM32F030xC/F09xxx)
- RAM : Up to 32KiB (6144b reserved by bootloader)
- Flash : Up to 128KiB (size first sector: 2x2048)
- Option RAM : 16b
- System RAM : 8KiB
Write to memory
Erasing memory
Wrote and verified address 0x08020000 (100.00%) Done.

Starting execution at address 0x08000000... done.

GPIO sequence start
delay 100000 us
delay 100000 us
setting gpio 17 to 0... OK
delay 100000 us
delay 100000 us
delay 100000 us
setting gpio 18 to 1... OK
delay 100000 us
delay 100000 us
delay 100000 us
setting gpio 18 to 0... OK
delay 100000 us
delay 100000 us
delay 100000 us
setting gpio 18 to 1... OK
GPIO sequence end



******************************************************************************************
FIRMWARE UPDATE SUCCESSFULL!!!
******************************************************************************************

insmod: ERROR: could not insert module ./moitessier_5.4.51-v7+.ko: Input/output error

******************************************************************************************
ERROR occured!!

Could not load "./moitessier_5.4.51-v7+.ko".
******************************************************************************************


******************************************************************************************
ERROR occured!!

You might try to install the package again.
******************************************************************************************

dpkg: error processing package moitessier (--install):
installed moitessier package post-installation script subprocess returned error exit status 1
Errors were encountered while processing:
moitessier
pi@openplotter:~/Downloads $


Greets Jürgen