This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CLOSED] Moitessier HAT GNNS signal instability?
#1
Hello all,

I've got a Moitessier HAT 1 on a RPi 4, with Openplotter 2 installed. Moitessier HAT firmware 2.1.1, kernel 5.4.51.

Openplotter is getting input with Signal K-protocol. With the NMEA-plugin in SignalK activated there seems to be no signal at all.

My problem is that the GNNS/GPS signal seems to vary randomly, the location is jumping all over the world chart, although the HAT-led for GNNS-signal is green. Anyone seen this before? Any solutions to suggest?

Code:
cat moitessier.tty

gives:

Quote:$GPRMC,004207.878,V,,,,,0.00,0.00,060180,,,N,V*3E
$GPVTG,0.00,T,,M,0.00,N,0.00,K,N*32
$GPGGA,004207.878,,,,,0,0,,,M,,M,,*4E
$GPGSA,A,1,,,,,,,,,,,,,,,,1*03
$GPGSA,A,1,,,,,,,,,,,,,,,,2*00
$GPGSA,A,1,,,,,,,,,,,,,,,,3*01
$GPGSV,1,1,00,0*65
$GLGSV,1,1,00,1*78
$GAGSV,1,1,00,0*74
$GPGLL,,,,,004207.878,V,N*7C
$GPTXT,01,01,02,ANTSTATUS=OPEN*2B
$GPRMC,004208.878,V,,,,,0.00,0.00,060180,,,N,V*31
$GPVTG,0.00,T,,M,0.00,N,0.00,K,N*32
$GPGGA,004208.878,,,,,0,0,,,M,,M,,*41
$GPGSA,A,1,,,,,,,,,,,,,,,,1*03
$GPGSA,A,1,,,,,,,,,,,,,,,,2*00
$GPGSA,A,1,,,,,,,,,,,,,,,,3*01
$GPGSV,1,1,00,0*65
$GLGSV,1,1,00,1*78
$GAGSV,1,1,00,0*74
$GPGLL,,,,,004208.878,V,N*73
$GPTXT,01,01,02,ANTSTATUS=OPEN*2B
$GPRMC,004209.878,V,,,,,0.00,0.00,060180,,,N,V*30
$GPVTG,0.00,T,,M,0.00,N,0.00,K,N*32
$GPGGA,004209.878,,,,,0,0,,,M,,M,,*40
$GPGSA,A,1,,,,,,,,,,,,,,,,1*03
$GPGSA,A,1,,,,,,,,,,,,,,,,2*00
$GPGSA,A,1,,,,,,,,,,,,,,,,3*01
$GPGSV,1,1,00,0*65
$GLGSV,1,1,00,1*78
$GAGSV,1,1,00,0*74
$GPGLL,,,,,004209.878,V,N*72
$GPTXT,01,01,02,ANTSTATUS=OPEN*2B
$GPRMC,004210.878,V,,,,,0.00,0.00,060180,,,N,V*38
$GPVTG,0.00,T,,M,0.00,N,0.00,K,N*32
$GPGGA,004210.878,,,,,0,0,,,M,,M,,*48
$GPGSA,A,1,,,,,,,,,,,,,,,,1*03
$GPGSA,A,1,,,,,,,,,,,,,,,,2*00
$GPGSA,A,1,,,,,,,,,,,,,,,,3*01
$GPGSV,1,1,00,0*65
$GLGSV,1,1,00,1*78
$GAGSV,1,1,00,0*74
$GPGLL,,,,,004210.878,V,N*7A
$GPTXT,01,01,02,ANTSTATUS=OPEN*2B
$GPRMC,004211.878,V,,,,,0.00,0.00,060180,,,N,V*39
$GPVTG,0.00,T,,M,0.00,N,0.00,K,N*32
$GPGGA,004211.878,,,,,0,0,,,M,,M,,*49
$GPGSA,A,1,,,,,,,,,,,,,,,,1*03
$GPGSA,A,1,,,,,,,,,,,,,,,,2*00
$GPGSA,A,1,,,,,,,,,,,,,,,,3*01
$GPGSV,1,1,00,0*65
$GLGSV,1,1,00,1*78
$GAGSV,1,1,00,0*74
$GPGLL,,,,,004211.878,V,N*7B
$GPTXT,01,01,02,ANTSTATUS=OPEN*2B

and 

Code:
cat moitessier.spi

Quote:$GPRMC,004236.878,V,,,,,0.00,0.00,060180,,,N,V*3C
$GPVTG,0.00,T,,M,0.00,N,0.00,K,N*32
$GPGGA,004236.878,,,,,0,0,,,M,,M,,*4C
$GPGSA,A,1,,,,,,,,,,,,,,,,1*03
$GPGSA,A,1,,,,,,,,,,,,,,,,2*00
$GPGSA,A,1,,,,,,,,,,,,,,,,3*01
$GPGSV,1,1,00,0*65
$GLGSV,1,1,00,1*78
$GAGSV,1,1,00,0*74
$GPGLL,,,,,004236.878,V,N*7E
$GPTXT,01,01,02,ANTSTATUS=OPEN*2B
$GPRMC,004237.878,V,,,,,0.00,0.00,060180,,,N,V*3D
$GPVTG,0.00,T,,M,0.00,N,0.00,K,N*32
$GPGGA,004237.878,,,,,0,0,,,M,,M,,*4D
$GPGSA,A,1,,,,,,,,,,,,,,,,1*03
$GPGSA,A,1,,,,,,,,,,,,,,,,2*00
$GPGSA,A,1,,,,,,,,,,,,,,,,3*01
$GPGSV,1,1,00,0*65
$GLGSV,1,1,00,1*78
$GAGSV,1,1,00,0*74
$GPGLL,,,,,004237.878,V,N*7F
$GPTXT,01,01,02,ANTSTATUS=OPEN*2B
$GPRMC,004238.878,V,,,,,0.00,0.00,060180,,,N,V*32
$GPVTG,0.00,T,,M,0.00,N,0.00,K,N*32
$GPGGA,004238.878,,,,,0,0,,,M,,M,,*42
$GPGSA,A,1,,,,,,,,,,,,,,,,1*03
$GPGSA,A,1,,,,,,,,,,,,,,,,2*00
$GPGSA,A,1,,,,,,,,,,,,,,,,3*01
$GPGSV,1,1,00,0*65
$GLGSV,1,1,00,1*78
$GAGSV,1,1,00,0*74
$GPGLL,,,,,004238.878,V,N*70
$GPTXT,01,01,02,ANTSTATUS=OPEN*2B
$GPRMC,004239.878,V,,,,,0.00,0.00,060180,,,N,V*33
$GPVTG,0.00,T,,M,0.00,N,0.00,K,N*32
$GPGGA,004239.878,,,,,0,0,,,M,,M,,*43
$GPGSA,A,1,,,,,,,,,,,,,,,,1*03
$GPGSA,A,1,,,,,,,,,,,,,,,,2*00
$GPGSA,A,1,,,,,,,,,,,,,,,,3*01
$GPGSV,1,1,00,0*65
$GLGSV,1,1,00,1*78
$GAGSV,1,1,00,0*74
$GPGLL,,,,,004239.878,V,N*71
$GPTXT,01,01,02,ANTSTATUS=OPEN*2B
Reply
#2
Same problem, same behavour with identical installation.

I didn't found any solution yet.

Before upgrating kernel, firmware and with the old input to opecpn everythings work correctly.

Waiting for some help.

Thanks to everyone
Reply
#3
From your NMEA data I can see that you have not a fixed position from satellites, are you indoor?
Reply
#4
marking as closed reopen if necessary
Reply
#5
Bug 
I suffer 100% the same problem, without Moitessier HAT...
The problem appeared when introducing signal K in Opencpn 5.2.0.9 .
I uninstalled and re-installed Signal k twice .
Immediately after re-installation, and rebuilding the connection in Serial, everything seems OK, GPS data are consistent and a FIX will occur after a few seconds. Quitting and rebooting appear to be just nice.
But... later on, say after 10~15 min, Boom, the position jumps everywhere on the planet, impossible to get a fix.

I checked it was not due to the GPS USB connection (port, Hub, GPS module (2 different Ublox8 USB GNSS modules) ...
I am completely disgusted of the insanity of this signal K connection !

I hope we can roll back very quickly to a more stable approach !
So sad it is just not good enough to install aboard ...
Cordialement
Didier B
Pi4, SSD USB3, OP 3.0 Touch SK 3.2.1 OpenCPN  5.8.4 :  Thank you  Thank you  Thank you


Reply
#6
Do not panic, let's centralize this issue here: https://forum.openmarine.net/showthread.php?tid=2871
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)