This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Signal K to YDWG-02
#1
Can anyone help with connecting a YDWG-02 to Signal K? I am trying to get gps data from the pi to my NMEA 2000 network. I have a new install of openplotter on a raspi 4. The Signal K sever is connected to the YDWG server set as Raw, UDP, Both. I can see the NMEA 2000 data (speed, depth, water temp) on the Signalk instrument panel but no gps data from the Pi on the Raymarine i70s multi display. The signalk to nmea2000 plug-in seems to me working a small I can see location strings in the signal k sever log. Should the i70s see the sk sever as a transducer?

Any help would be appreciated.

Mike
Reply
#2
(2020-09-07, 10:25 PM)SailMorr Wrote: Can anyone help with connecting a YDWG-02 to Signal K? I am trying to get gps data from the pi to my NMEA 2000 network. I have a new install of openplotter on a raspi 4. The Signal K sever is connected to the YDWG server set as Raw, UDP, Both. I can see the NMEA 2000 data (speed, depth, water temp) on the Signalk instrument panel but no gps data from the Pi on the Raymarine i70s multi display. The signalk to nmea2000 plug-in seems to me working a small I can see location strings in the signal k sever log. Should the i70s see the sk sever as a transducer?

Any help would be appreciated.

Mike

The SeatalkNG network will "see" the YDWG-02 as a "device." I'm not sure that signalk sends data back out over UDP. I thinking I read something that SK won't send over UDP. Try switching to TCP and see if that works. I've had issues also, so I'm not sure that I can help you any further, as I don't know much more and definitely don't know the "why" of it.
Reply
#3
try to install in SK: plugin "signalk to nmea2000" from here you define which sk data should be send to 2000.
you will need to activate GPS. normaly it goes per network to UDP 10110 but you also are able to define an serial CAN device to send your data to the CAN-Bus.

report us, if this works for you.

holger
Reply
#4
Thanks for the reply, reminded me that I wanted to come back and post the fix.

I found out from the developer of WilhemSK (great app) that SignalK does not transmit nmea2k over a UDP connection. I changed to TCP and the data flows both ways.

Mike
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)