This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Signal K server hangs
#1
I am doing an electronic compass project, with an IMU connected to my rPI. I connect it to Signal K through Pypilot. Since update to Signal K 1.34.0 the server hangs after about a minute, so that nothing shows in the Data Browser or in the Server Log. Things worked great during version 1.33.0 but I had the same problem in version 1.32.0. What can be done? Where should I look to fix it? Or should I just wait for things to get more mature and stable?

[Edit]: I run "sudo systemctl restart signalk.service", and it works again, for about a minute. The web interface, however, is unresponsive so I can't restart Signal K from there.
Reply
#2
(2020-10-05, 05:42 PM)Guttagrynna Wrote: I am doing an electronic compass project, with an IMU connected to my rPI. I connect it to Signal K through Pypilot. Since update to Signal K 1.34.0 the server hangs after about a minute, so that nothing shows in the Data Browser or in the Server Log. Things worked great during version 1.33.0 but I had the same problem in version 1.32.0. What can be done? Where should I look to fix it? Or should I just wait for things to get more mature and stable?

[Edit]: I run "sudo systemctl restart signalk.service", and it works again, for about a minute. The web interface, however, is unresponsive so I can't restart Signal K from there.

SignalK has a support channel on Slack

You can download slack mobile app. 
The channel name SignalK-dev. 

It’s a very active and responsive channel. 

Thanks
Download BBN Marine OS for raspberry pi 

https://bareboat-necessities.github.io/m...at-os.html

Video of actual installation:

https://www.youtube.com/watch?v=3zMjUs2X3qU


Reply
#3
(2020-10-05, 08:03 PM)mgrouch Wrote: SignalK has a support channel on Slack

You can download slack mobile app. 
The channel name SignalK-dev. 

It’s a very active and responsive channel. 

Thanks, I just did that. Very helpful.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)