2020-11-05, 12:27 PM
I am at a loss what could be my problem with the remote:
When I run Arduino.py I can see codes from both RF and IR remotes
In the browser I don't see anything coming in.
The GPIO pins on the Pi are registering correctly.
-Using tinypilot image 2020_10_27.img
-Latest hat.ino from git.
I have a new Arduino Pro Mini confirmed running at 8MHz.
I am using various RF remotes I have lying around with the IR LED on Arduino pin3
Tried a Pi Zero and a PI 2b , Arduino SPI wired directly to the PI with short wires .
Supply voltages are 3.29 V on all pins
I have no external EEPROM and only IMU connected
Any pointers would be appreciated
When I run Arduino.py I can see codes from both RF and IR remotes
In the browser I don't see anything coming in.
The GPIO pins on the Pi are registering correctly.
-Using tinypilot image 2020_10_27.img
-Latest hat.ino from git.
I have a new Arduino Pro Mini confirmed running at 8MHz.
I am using various RF remotes I have lying around with the IR LED on Arduino pin3
Tried a Pi Zero and a PI 2b , Arduino SPI wired directly to the PI with short wires .
Supply voltages are 3.29 V on all pins
I have no external EEPROM and only IMU connected
Any pointers would be appreciated