2020-11-18, 03:56 AM
Just a couple of updates:
1. The 'NC' port on the Relay, should actually be the 'NO' port
2. The LED/resistor between pin 40 and the 3.3v board ground doesn't trip everytime, as the voltage only drops to 1.25v. therefore, I have paralleled (or you can replace) this with a 1k resistor, shutsdown in <5 seconds then
1. The 'NC' port on the Relay, should actually be the 'NO' port
2. The LED/resistor between pin 40 and the 3.3v board ground doesn't trip everytime, as the voltage only drops to 1.25v. therefore, I have paralleled (or you can replace) this with a 1k resistor, shutsdown in <5 seconds then