This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Old images
#1
Hi there

I am in the process of building a new system and I wrote the "starting img" to my usb ssd drive. The RPi on boot up says it requires a newer software in order to boot from usb. 
It seems silly to have to write the img to an sd card and then update it then copy the updated img to the ssd drive each and every time this task is required. 

Maybe we can get an updated img with the current kernel so this process does not need to be duplicated by each person wishing to boot from usb?
Reply
#2
Another way is to check out my post https://pysselilivet.blogspot.com/2019/0...ml#OptionB
Always the latest ;-)
________________________________________

Blog; https://pysselilivet.blogspot.com/
Reply
#3
(2020-11-03, 08:05 PM)MatsA Wrote: Another way is to check out my post https://pysselilivet.blogspot.com/2019/0...ml#OptionB
Always the latest ;-)

Thanks MatsA 
I started installing from a clean image with recommended software preloaded but I could not get the OpenPlotter menu item to work... so I was stuck with "others" and that bothered me, so I decided to go with the starting img. it's all done now and I created a backup of the updated img so it will not be an issue for me again... just for everyone else that wants to boot from usb....
Reply
#4
yes, stating images are a little old now and we should create new ones but we have no much time now, we will do ASAP
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)