(2020-11-16, 10:53 AM)Didier B Wrote: Edit : in fact one GY91 assembly, supporting both an MPU 9250 & an environment BMP280 !After a few hours the I2C info (pressure, temperature) disappeared in the OpenCPN dashboard and the line of the corresponding connexion became steady in Signal K Dashboard. On next startup(*) everything appears OK !
Info (of same sensor GY91) dealt by PiPylot (boat attitude) are not affected by this phenomenon.
EDIT (*) not reboot, start up from cold 0V state ... Only info dealt by IICApplication is concerned, info dealt by Pipylot remains displayed . (though both kind of info came from same sensor board on same IIC link !
Cordialement
Didier B
Pi4, SSD USB3, OP 3.0 Touch SK 3.2.1 OpenCPN 5.8.4 : Thank you Thank you Thank you
Didier B
Pi4, SSD USB3, OP 3.0 Touch SK 3.2.1 OpenCPN 5.8.4 : Thank you Thank you Thank you