2021-05-23, 03:19 PM
(2021-04-28, 12:47 PM)Sailoog Wrote:(2021-04-26, 05:45 AM)jekyllandhyde Wrote: Rasberry Pi4, Openplotter, Signal K, etc.
I have been testing out the Adafruit INA260 sensor with Openplotter to show my house battery voltage. I cannot get the path to appear in the Signal K data browser. It shows as setup properly in the I2C sensors area with the correct ID (40) and path - electrical.batteries.1.voltage. I essentially set it up in a similar way as my BME280 sensor which works great. I thought maybe the sensor was faulty so I bought a second one and it still doesn't work. I don't know of an easy alternative way to see sensor data (outside of SignalK). It seems like a driver issue but I'm not technical enough to dive deep under the hood. If someone out there is technical and can dig into this, I'll send you a sensor for free.
I added the INA260 to openplotter-i2c app but never tested it because I do not have any sensor. Please contact me by private to give you my address and get that sensor if possible. Thanks.
Hello,
is there already an update on the problem with the INA260 sensor?
I have exactly the same problem with the sensor.