Posts: 325
Threads: 24
Joined: Apr 2019
Reputation:
6
(2020-11-11, 10:53 PM)seandepagnier Wrote: (2020-11-11, 09:52 AM)Gilles Wrote: I inserted a GPIO expansion card, that I just received, between the Moitessier Hat and the Raspberry, now the blue led is still flashing, the red led is on and now an orange led lights. the orange led indicates data. So this is not a good sign if it stays lit because something else is communicating on your board. I suggest that you attach the controller by just the 4 wire without additional hats.
Ensure /dev/serial0 points to /dev/ttyAMA0
Try applying power to the controller at the exact moment you run avrdude. If you cannot get it working, please contact me by email and as a last resort I will send you a new controller.
(2020-11-11, 05:15 PM)Max1947 Wrote: Ok, for the moment I give up. I wait for Sean to make progress.
![Cool Cool](https://forum.openmarine.net/images/smilies/cool.png)
Is there a chance you can try the tinypilot image to verify the motor controller?
Hi Sean, as I have repeatedly reminded, I don't understand software, except with copy and paste. If you have time and desire to explain I will follow you. The alternative for me is to wait until everything is ok.
I attach more photos, I don't know if they can be useful.
https://i.imgur.com/aEOy8Eh.png
https://i.imgur.com/bZ1b8Hn.png
https://i.imgur.com/N5zs8py.png
https://i.imgur.com/OF4gJpx.png
Posts: 2,314
Threads: 21
Joined: Jun 2016
Reputation:
72
(2020-11-13, 11:23 AM)Max1947 Wrote: Hi Sean, as I have repeatedly reminded, I don't understand software, except with copy and paste. If you have time and desire to explain I will follow you. The alternative for me is to wait until everything is ok.
I attach more photos, I don't know if they can be useful.
![Huh Huh](https://forum.openmarine.net/images/smilies/huh.png)
I suggest you try using tinypilot instead of openplotter and get it working to verify the hardware and motor controller. This has no configuration needed and should make it easier.
If you try again with openplotter please follow all the steps posted here:
https://forum.openmarine.net/showthread....5#pid16885
I will work on improving the openplotter-pypilot integration, todo list is rather long already. each new version of openplotter breaks it, and same with signalk etc
Posts: 325
Threads: 24
Joined: Apr 2019
Reputation:
6
Okay, Sean.
I finally saw my Chinese actuator working. Thanks for all.
Now I have to understand the calibration and configuration well ... we feel, thanks again and good wind, always in the face of Covid!
Posts: 3
Threads: 0
Joined: Sep 2020
Reputation:
0
2020-11-24, 03:47 PM
(This post was last modified: 2020-12-04, 10:50 AM by 2uwxei1h.)
hii....don´t know how you now connected the two devices that are IRON-BLUE ALUMINUM SPEAR - MZFAISF-3 (TELESCOPIC ROUND HEAD).
A popular mistake ist to connect tx with tx and rx with rx on both sides but you have to connect tx with rx and rx with tx. Also you need to have the same GND for both devices.
Posts: 143
Threads: 16
Joined: Jul 2019
Reputation:
9
(2020-11-14, 11:11 PM)Max1947 Wrote: I finally saw my Chinese actuator working.
Hi Max1947. What actuator are you using?
Posts: 325
Threads: 24
Joined: Apr 2019
Reputation:
6
(2020-11-27, 03:39 AM)CapnKernel Wrote: (2020-11-14, 11:11 PM)Max1947 Wrote: I finally saw my Chinese actuator working.
Hi Max1947. What actuator are you using?
See: https://es.aliexpress.com/item/330143666...63c0mbz1Io
Posts: 325
Threads: 24
Joined: Apr 2019
Reputation:
6
(2020-11-13, 06:07 PM)seandepagnier Wrote: (2020-11-13, 11:23 AM)Max1947 Wrote: Hi Sean, as I have repeatedly reminded, I don't understand software, except with copy and paste. If you have time and desire to explain I will follow you. The alternative for me is to wait until everything is ok.
I attach more photos, I don't know if they can be useful.
![Huh Huh](https://forum.openmarine.net/images/smilies/huh.png)
I suggest you try using tinypilot instead of openplotter and get it working to verify the hardware and motor controller. This has no configuration needed and should make it easier.
If you try again with openplotter please follow all the steps posted here:
https://forum.openmarine.net/showthread....5#pid16885
I will work on improving the openplotter-pypilot integration, todo list is rather long already. each new version of openplotter breaks it, and same with signalk etc
Ciao Sean,
i got a PiZeroW to try tinypilot. I have tried several SD, but on the terminal I always see this:
https://imagizer.imageshack.com/img923/7792/LRFVrT.jpg
what am I doing wrong?
Posts: 2,314
Threads: 21
Joined: Jun 2016
Reputation:
72
this looks normal, what is the problem? Usually the terminal is not needed except for debugging but even then I use wifi.
Posts: 35
Threads: 9
Joined: Sep 2017
Reputation:
2
(2020-11-14, 11:11 PM)Max1947 Wrote: Okay, Sean.
I finally saw my Chinese actuator working. Thanks for all.
Now I have to understand the calibration and configuration well ... we feel, thanks again and good wind, always in the face of Covid!
![Tongue Tongue](https://forum.openmarine.net/images/smilies/tongue.png)
Hi Max,
I am reading this post with attention.
Can you tell us what is the solution that has finaly worked ?
Posts: 325
Threads: 24
Joined: Apr 2019
Reputation:
6
(2020-12-01, 05:14 PM)topodom Wrote: (2020-11-14, 11:11 PM)Max1947 Wrote: Okay, Sean.
I finally saw my Chinese actuator working. Thanks for all.
Now I have to understand the calibration and configuration well ... we feel, thanks again and good wind, always in the face of Covid!
![Tongue Tongue](https://forum.openmarine.net/images/smilies/tongue.png)
Hi Max,
I am reading this post with attention.
Can you tell us what is the solution that has finaly worked ? Ciao Topodom,
the one suggested by Sean: https://forum.openmarine.net/showthread....5#pid16885
Now I'm trying to figure out Tyni with a PiZero.
|