2020-11-08, 11:38 AM
Thanks Sean.
I had already prepared a new SD with "OpenPlotter Moitessier HAT.img".
So all updated.
Now in addition to the red LED which indicates that there is current, the orange LED is seen faintly every 4/5 seconds.
So I'm assuming your controller isn't broken but still something is wrong.
The actuator shows no signs of life.
Let's take small steps and wait.
Thanks again.
I had already prepared a new SD with "OpenPlotter Moitessier HAT.img".
So all updated.
Now in addition to the red LED which indicates that there is current, the orange LED is seen faintly every 4/5 seconds.
So I'm assuming your controller isn't broken but still something is wrong.
The actuator shows no signs of life.
Let's take small steps and wait.
Thanks again.