This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.
OpenMarine › OpenPlotter › How do I...? v
How do I get 4G dongle working?

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Linear Mode
How do I get 4G dongle working?
tkurki Offline
Senior Member
****
Posts: 330
Threads: 5
Joined: Mar 2018
Reputation: 24
#4
2020-11-08, 07:35 PM
I've used e3372 for quite a while, but not with OpenPlotter, so can't help with OP stuff. Sounds like you are missing routing.

My RPi is a headless system configured with Ansible. In case it helps the relevant stuff is
https://github.com/tkurki/marinepi-provi...ml#L42-L45
https://github.com/tkurki/marinepi-provi...nat_router

192.168.8.100 is the ip address of your RPi and 192.168.8.1 is the ip of the dongle, that is acting as the gateway in the 192.168.8.x segment. You see 192.168.8.1 as the address when accessing its web ui.
Find
Reply


Messages In This Thread
How do I get 4G dongle working? - by Blue Ocean - 2020-11-05, 04:37 PM
RE: How do I get 4G dongle working? - by holgerw - 2020-11-07, 09:41 PM
RE: How do I get 4G dongle working? - by tkurki - 2020-11-08, 07:35 PM
RE: How do I get 4G dongle working? - by holgerw - 2020-11-08, 08:09 PM
RE: How do I get 4G dongle working? - by holgerw - 2020-11-09, 05:14 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)