2020-11-16, 07:01 PM
Hi,
tried to use an other LCD display this day but I was unsuccessful.
Use a jlx12864 with spi like the Nokia 5110.
Try to bring it up to work with a raspberry pi zero with tinypilot image from 27.10.2020
Nokia 5110 works, the other not.
There is a (eep)rom on the controller pcb. Do I have to connect some of the pins from this with the tynipilot?
The technical description from the factory is very poor.
Is there something I have to change in the config-files of tinypilot or in the programs itselfs running on the pi zero(where?)
The connections are labeled a little bit different compared to the Nokia display but this is not the problem.
Best regards
Andreas
tried to use an other LCD display this day but I was unsuccessful.
Use a jlx12864 with spi like the Nokia 5110.
Try to bring it up to work with a raspberry pi zero with tinypilot image from 27.10.2020
Nokia 5110 works, the other not.
There is a (eep)rom on the controller pcb. Do I have to connect some of the pins from this with the tynipilot?
The technical description from the factory is very poor.
Is there something I have to change in the config-files of tinypilot or in the programs itselfs running on the pi zero(where?)
The connections are labeled a little bit different compared to the Nokia display but this is not the problem.
Best regards
Andreas