2021-04-09, 08:32 PM
(This post was last modified: 2021-04-09, 08:56 PM by Huevo.
Edit Reason: missed some info
)
hi,
today I have been trying to "clone" the driver either fbcp-ili9341 & fbtft (I found in github forum)in to the tinypilot / piCore.
it is what I have done, from my zero knowledge (I Dont know how to communicate raspberry picore form my laptop):
1- Connecting the raspberry to my wifi (my smartphone as hotspot). sudo wifi.sh
it was sucsesfull.
once connected to the wifi,
2- I have follow the next:
sudo apt-get install cmake
cd ~
git clone https://github.com/juj/fbcp-ili9341.git
cd fbcp-ili9341
mkdir build
cd build
cmake [options] ..
make -j
sudo ./fbcp-ili9341
"sudo apt-get install cmake", piCore says that command not found.
any way I kept going writing the command to clone the driver
"git clone https://github.com/juj/fbcp-ili9341.git"
but piCore says unable to find remote helper for https.
is it totally wrong what I am doing??
How could I clone or install the driver to the picore then??
thanks for the help
regards,