This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Cannot get gps in signalK to opencpn
#1
    Rpi 4 noobs last download.
opencpn localhost:51000: socket connection refused. So i try port 51000 in stead of 3000 no result, set it back to network port 3000
When I use ttyusbo nmea 1830 in connections opencpn it works and shows nmea debug window, but nothing happens in connectons network-input signal K- localhost- 10110.
changed also network port 3000 en 51000.
connection pypilot and signal K lookes oke
What am i doing wrong or is it a format fault?


Attached Files Image(s)
       
Reply
#2
i did it this way:
in serial/openplotter make an connection to gpsd.
this will connect the gps to gpsd AND connect gpsd to signalK.
in opencpn make ONLY ONE connection to signalk (without autoconnect)
thats all you should need.

good luck.
Reply
#3
Have you added ttyusbo nmea 0183 to signalk in the serial app?
Reply
#4
(2020-11-28, 03:16 PM)holgerw Wrote: i did it this way:
in serial/openplotter make an connection to gpsd.
this will connect the gps to gpsd AND connect gpsd to signalK.
in opencpn make ONLY ONE connection to signalk (without autoconnect)
thats all you should need.

good luck.

You are give the solluction.
It is working now. But gpsd is used in debian programs. In the manual they talk about signal K.
Indead without autoconnect.
Txns
Reinier
Reply
#5
Did connecting the gps to the signalk serial app not work?
https://openplotter.readthedocs.io/en/la...l_app.html
Reply
#6
Connecting is the second Step, maybe the Doc is not so clear:
https://openplotter.readthedocs.io/en/la...cting.html

Fine, you get your position at last. Happy boating.
Reply
#7
(2020-11-29, 04:42 PM)holgerw Wrote: Connecting is the second Step, maybe the Doc is not so clear:
https://openplotter.readthedocs.io/en/la...cting.html

Fine, you get your position at last. Happy boating.

Txns
Had a pdf manual download, i sea there is now much more to read. I will proceed now.
Is there more over the pypilot motor connection teo read? 
b4n Reinier
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)