2020-12-06, 12:41 AM
I thought I would do another fresh install and only add the IMU with Pypilot. This time I use the image file not NOOBS file but the image file freshly downloaded from the web site. The version on the download is still 2020-03-24 Openplotter V2.
Before setting up the IMU I updated all the apps in settings and installed Pypilot. Pypilot is version is 2.1.1-beta.
after allowing I2C in the settings, I opened Pypiloit, set it to compass only at which point it recognised the IMU as STM LSM9DS0.
I then attempted to run the calibration program from the GUI and Terminal with exactly the same result.
Before setting up the IMU I updated all the apps in settings and installed Pypilot. Pypilot is version is 2.1.1-beta.
after allowing I2C in the settings, I opened Pypiloit, set it to compass only at which point it recognised the IMU as STM LSM9DS0.
I then attempted to run the calibration program from the GUI and Terminal with exactly the same result.