This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Switches in SignalK with example code using NodeRed
#1
Did a post explaining switches in SignalK, which maybe can be of interest ? 

The switch used in the example is a Shelly 1 togheter with NodeRed, the NR Dashboard and WilhelmSK(Optional)

https://pysselilivet.blogspot.com/2021/0...d-and.html
________________________________________

Blog; https://pysselilivet.blogspot.com/
Reply
#2
thanks for sharing!
Reply
#3
@sbender have done it again and supplied us with new plugins for digital switching.

For the Shelly switch
https://www.npmjs.com/package/signalk-shelly

or if you prefer Sonoff
https://www.npmjs.com/package/signalk-sonoff-ewelink
________________________________________

Blog; https://pysselilivet.blogspot.com/
Reply
#4
(2021-02-27, 07:55 PM)MatsA Wrote: @sbender have done it again and supplied us with new plugins for digital switching.

For the Shelly switch
https://www.npmjs.com/package/signalk-shelly

or if you prefer Sonoff
https://www.npmjs.com/package/signalk-sonoff-ewelink

I'm a little lost here. How do you get SignalK to recognize the Shelly in the plugin? I assume some sort of connection must be made first, but there is zero documentation on how to connect it directly to the plugin in SignalK.
Reply
#5
(2021-10-09, 07:53 AM)SCarns Wrote: I'm a little lost here. How do you get SignalK to recognize the Shelly in the plugin? I assume some sort of connection must be made first, but there is zero documentation on how to connect it directly to the plugin in SignalK.

If the SK server is on the same WiFi as the Shellys, they should appear automatically using "Plugin config" for the Shelly plugin.
________________________________________

Blog; https://pysselilivet.blogspot.com/
Reply
#6
(2021-10-09, 10:02 AM)MatsA Wrote:
(2021-10-09, 07:53 AM)SCarns Wrote: I'm a little lost here. How do you get SignalK to recognize the Shelly in the plugin? I assume some sort of connection must be made first, but there is zero documentation on how to connect it directly to the plugin in SignalK.

If the SK server is on the same WiFi as the Shellys, they should appear automatically using "Plugin config" for the Shelly plugin.

Thanks, that was what I was expecting to happen, but it hasn't. I'll reset the device and go from there.
Reply
#7
In the end, what I had to do was change the CoIoT settings from "mcast" to the IP of my signalk server. Then showed up as expected.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)