2021-01-06, 09:45 AM
(This post was last modified: 2021-01-15, 12:39 PM by Screenshot.)
Hi everyone, just wanted to share my Wi-Fi display code and plans.
It displays the chosen information of signalk on a 4.2 inch E-ink display. Power consumption is low (0.35W) with refresh rate of 2s, could be improved.
There is a waterproof button at the bottom to switch between display mode / information
It runs on 5v, but there is room for a transformer in the case
There might be some bugs in the code, still work in progress to add more signalK values (currently only ground speed and heading)
https://github.com/Pataclop/esp32-eink
It displays the chosen information of signalk on a 4.2 inch E-ink display. Power consumption is low (0.35W) with refresh rate of 2s, could be improved.
There is a waterproof button at the bottom to switch between display mode / information
It runs on 5v, but there is room for a transformer in the case
There might be some bugs in the code, still work in progress to add more signalK values (currently only ground speed and heading)
https://github.com/Pataclop/esp32-eink